x France Trampoline uses cookies to offer you the best possible service. By continuing browsing, you accept the use of: Read more

Turnbuckle for 10 mm wire rope

Turnbuckle for 10 mm wire rope


In stock

84,00 € VAT incl.

France Trampoline provides turnbuckles for 10 mm in diameter wire ropes, allowing you to fix a net to a supporting structure that does not have 4 solid sides (wall, beam…).

The turnbuckle is the part fixed on the wall opposite to the terminal. This part will allow you to stretch your cable. The turnbuckle attaches to a piton or a deck plate which is screwed into your supporting structure.

- The turnbuckle is made up of 2 parts: on one side a jaw with a pin which will allow you to attach the turnbuckle to the piton or deck plate and the other side a swage which will join up to the wire rope.

- To place the wire rope in the turnbuckle, you must unscrew the swage. Once the wire rope is in place tightly screw up the swage.

- The wire rope will be fixed thanks to the rigging screw and the turnbuckle terminal. You can attach the terminal directly onto an eye screw or deck plate, tighten the wire rope and attach the turnbucklerigging screw to the opposite wall. The wire rope is tightened by screwing up the rigging screw. Be careful, more the wire rope is stretched more the eye screws or deck plates are under tension. Make sure they are well fixed into your supporting structure.

- The turnbuckle made from stainless steel is extremely resistant. It can be used indoors, outdoors and in nautical conditions.

- For a more aesthetic and long-lasting result, France Trampoline advises you to use shackles to attach your wire rope to your net with or without boltrope to avoid friction.

Be called back by an advisor

Did you not find what you were looking for?

We will call you back at no charge and answer your questions.

Be called back by an advisor