14ft Boost'Up Premium green frame pad

The frame pad protects you from the springs on your trampoline if you fall on them. It is therefore an essential safety component of your trampoline. As soon as you notice that your frame pad is damaged, it is important to change it. France Trampoline’s advantage is that our spare parts fit any trampoline, regardless of the brand. This frame pad has been designed for trampolines with an exterior diameter of 4.30 m and springs of 230 mm in length.

This Premium frame pad was originally designed for the Boost'Up 430 but can also be used with any other trampoline with the same measurements. Make sure you measure the diameter of your trampoline and the length of your springs carefully before buying the pad.

Safety pad for 14ft round trampoline

• This Premium frame pad is made of a compact monobloc, expanded polyethylene foam (or EPE). This foam is 30 mm thick but is also shock absorbant and will break any falls effectively and gently. Another advantage is that this foam is waterproof. Thanks to these properties, it will not be sensitive to frost or mould.
• Contrary to most frame pads on the market, made from small slivers of fragile foam, our frame pads are made from a monobloc foam which is far sturdier.
• We use a technical coating of PVC, which is 0.55 mm thick. This PVC cover has a density of 650 g/m².
• The underside of the pad is made from PP 2x3 jumping fabric, ensuring high resistance to spring friction and rapid, efficient water drainage. Thanks to this drainage system, the inner pad foam is protected from moisture and does not deteriorate over time.
• The frame pad is held in place using a fixation system made of eyelets and thick black elastic straps. The 32 eyelets are placed around the inferior edge of the frame pad and 16 black elastic straps are threaded through the eyelets and then fixed to the metallic framework. 

Before ordering, measure your trampoline carefully, taking the measurements from outer edge to outer edge of the steel framework.