10ft trampoline jumping mat Ø305 - 54 springs 165 mm

If your jumping mat is damaged, it is essential to change it. This jumping mat is for trampolines of 1.83 m in diameter with 42 springs of 180 mm, even if you did not buy it at France Trampoline.

- This jumping mat is for our Access 300, Initio 300, Strat'Up 300 trampoline and any other trampoline with the same measurements: the same diameter, number and length of springs. It is preferable to ask a second person to help you measure the exterior diameter of the trampoline.

- Our jumping mats are made from mesh fabric, this material has really proven itself to be incredibly shock and time resistant. They have also been UV protected which improves durability.

- On our range of jumping mats, we ave used 8 rows of stitches and under the pad there is a reinforcement strip which holds the rings firmly in place. For extra solidity we use hot-dip galvanised steel rings, that are resistant to rust.

- Please make sure you measure your springs before ordering. This jumping pad is for trampolines with 54 springs of 165 mm in length. If your springs are longer then 185 mm or shorter the 170 mm, this jumping mat will not be adapted. You should measure the springs by detaching one of them and taking the measurement from hook to hook. To remove it, press down firmly on the centre of the coil, so that you can pull on the hook, on the side closest to the framework of the trampoline.

- If your trampoline has 150 mm long springs, we inform you that this jumping mat will also be compatible with your trampoline. Your springs will be a bit tighter but you can still install this jumping mat on your trampoline.

Springs are sold separately