Circular framework 250 Trampoline

In stock


Replace the hot-dip galvanised steel circular framework on your Jump’up 250.



    The framework on your trampoline can get damaged after violent winds or after several years of intensive use. Thanks to this spare part, you will not need to buy a brand new trampoline to continue to play on your trampoline.

    - This circular steel framework for Jump’Up 250, Access 250 and Oxygen 250 has been completely hot-dip galvanised. It can be used on a trampoline with the following characteristics: an exterior diameter of 8ft / 2.44 m, 6 circular components with 8 holes for the springs and tubes with a diameter of 38 mm with cinched ends which fit into the T-junction components.

    - To make your trampoline more durable and guarantee 100% use for your children, this galvanised steel tube has a diameter of 38 mm and a thickness of 1.5 mm.

    - The ends of this tube are cinched and must be assembled with T-junction components. This prevents the use of soldering, which weakens the structure in the long run. T-junction components give maximum solidity to the whole structure of the trampoline.

    If your trampoline is from another brand then France Trampoline and your trampoline does not have the above characteristics, then our galvanised steel tube will not be adapted to your trampoline. If you have any doubts about compatibility, do not hesitate to contact us.

    Warning : The springs and T junction components are sold separately.

    Please note: This item is not compatible with other brands of trampolines.

    Structure materialGalvanized steel - corrosion resistant
    Steel frame diameter & thickness38 x 1,5 mm
    Trampoline size244 cm
    France Trampoline modelJump'Up / Access / Oxygen 250
    CategoriesArcs de cercle armature
    Be called back by an advisor

    Did you not find what you were looking for?

    We will call you back at no charge and answer your questions.