Frog Pack - Frog Zipline + Ninjaline

Choose an empty space : healthy trees with a minimum 36in (92cm) circumference or a 12in (31cm) diameter.

1 : Departing tree with a maximum circumference of 188 cm / minimum diameter 30 cm  and maximum diameter 60 cm (a longer start cable is also available FTTYRO_ELIN14).

2 : Arrival tree with a maximum circumference of 92 cm (minimum diameter 30 cm, with a maximum diameter of 40 cm)

The Point of arrival must be 2ft. (61cm) higher than the tallest user. The Starting point needs to be the highest to create a safe course. For your safety; an 8% incline is recommended.

A : Height of departure = height of the user + 2ft. (61cm) + drop

B : Incline = length of the course x 8% incline

Please note that the distance between the starting point and the finishing point must not exceed 28m.

When you are sitting on the seat of your zip line, you must be able to reach the pulley handles.


1- Use the ‘S’ between the pulley and the seat to take up the suspension rope.
2- If that's not enough, you can tie a knot in the rope under the seat of the zip line.

Safety first and foremost! Check your installation before each use.

- Take the rope inside as soon as the temperature drops below 0 degrees.
- Before each use, check the pulley, rope, support and all fastenings for any signs of - deterioration, excessive wear, fraying, cuts or sharp edges, and replace them if necessary.
- Test frequently under tension.
- In salty environments (near the ocean), galvanised steel cable can corrode over time; regular checks are essential, and replacement may be necessary after two years' exposure.